Sunday, July 5, 2015

MCKBD 2014

The 2014 installment of My Church is Kinda a Big Deal features lots of change.



We went through 3 completely different set designs before we landed on one 4 day before the install.

The first


We planned to purchase 80 mega lights to build this awesome structure, but due to shipping costs, financial delays, and timing we had to scrap this idea 3 weeks out.

The second


Twelve days out we ordered and received 30 Colordo 3Ps from a dealer online.  Once we received them, we found most units did not have proper hardware and multiple units were not functional.  So, obviously we were not willing to pay for full price for the issues with these lights.  Thus the sale fell through and we were left with 4 days to figure out a set.

The third and final




Here is what we finally landed on.  We kept the vertical pipe layout from our second set and added a few elements.  One of the coolest, and hardest parts of this set is random layout.  Anyone that knows me knows, I am super OCD.  I typically touch every piece on a Catan board (nobody likes to put things in the exact center of the hexes.....)  Most every set I build is symmetrical.  Not only does it make for expansive beautiful looks, but it also makes programming easier.  I have found that I have grown a ton getting out of my comfort zone with this set that is so far from symmetrical.  Rest assured however the past 3 sets following were symmetrical within a very small margin of error.


On to building this set.  We purchased all our pipe for this set (1.5" rigid steel conduit) from Home Depot.  Although we had to paint it, it was easily worth it since they cut and threaded all of the pipe for free.  We used an oil based paint (flat black) so that the paint would bond with the pipe.  We had a bunch of our outstanding volunteers jump in last minute to help.

We used grid lock pipe clamps to hold all of our pipes to our grid.  We planned to use double cheese borough but had to go with grid locks due to budget.  At the bottom / top of each pipe we had a Mac 101 wash (also some with 301s).  We made some interesting clamps form 3/8 bolts, uni strut parts, and C clamps to allow us to attach the lights at the very end of the pipe.



Behind our grid of random pipes and 101s, we hung a Aluminum screening drop.






In addition to the drop and flown pipes we made a ton of pipe base plates out of 3/4" plywood, 2x4s, and pipe flanges.  Since we only had a few pounds per pipe these worked great.  Obviously not for holding up a ton of lights, but good for our short term purpose.  We also added a bunch of our Colorblast TRXs as back lights to our lower pipes for some more visual interest and back light.

All in all, a somewhat simple set but great considering the four day timeline.













No comments:

Post a Comment