Sheer fabric has been a fallback for me a ton of times. We bought a roll of 55 yards of this from Rose Brand for about $300. We used white. In the near future, I am going to order some silver too that or the amazing cloud color. Fabric Link
Our space is 21' tall, so we made 6- 23' panels from the roll. In the past I have worked with this fabric and fastened it with safety pins. This works ok, but is time consuming, inconsistent, and you experience the inevitable finger pricks. One thing that anyone who works closely with me learns very quick, is that I am all about processes. If i'm doing something I will try and make it easier for the future, even if it takes more time on the front end.... So, at the top of our new fabric, I put my patented ghetto webbing!
The ghetto webbing makes life super easy once it is done. Here is the process to make it:
We used a straight edge and scissors to make sure our cuts were flush. If you have ever seen me cut gel, you know why :)
We make it by placing 2 rows of gaff tape on each side of the fabric. One strip is only on the fabric and one is half way past the top attaching to the other side of gaff. Sometimes a 3rd to overlap is necessary. We then poke wholes every 6 inches with a knife and add tie line through the holes.
Then it is as easy as tieing it up. It gives you 10' for fabric that can be hung in 2 minutes as opposed to 10. Also you never run into issues of the fabric bunching because it is not pinned level.
I have also done this same process with some fabric folds every few inches. It makes for a really cool look, a little less structure, and it looks more organic.
Another cool thing about the ghetto webbing is that you can easily add some density by doubling back the panel. Instead of 10' of fabric you start at the center of the panel and tie both sides up one direction until its all up, giving you a nice thick 5' section.
You can also add fullness by tying every other point together
We doubled up our sheer and I it amazing as always.
What are the stands made from that your mid level spots are on? I've been looking for a way to get my spots up off the floor for some dimension and those look great!
ReplyDeleteAaron they are made of 2" diameter pipe and 2 1" steel place. They are welded together. Our have 18" x 18" plates with a 4' pipe. Any machine or welding shop should be able to build them pretty easy.
ReplyDeleteAwesome! Thanks so much!
ReplyDelete